Nine tips for daily maintenance of LED transparent screen

Author: From: Time: 2020-01-06

Nine tips for daily maintenance of LED transparent screen

Many people are very new to the concept of LED transparent screen, so how to maintain LED transparent screen? Pay attention to the following points during the routine maintenance of LED transparent screen:

1.For maintenance, use a vacuum cleaner and air gun facilities to remove dust. Do not wipe with too hard or rough cloth or dirty cloth to prevent damage to the product surface.

2.It is recommended that the LED display has a rest period of more than 2 hours per day, and the LED display should be used at least once a week during the rainy season. Generally turn on the screen at least once a month and light up for more than 2 hours.

3.The led display needs to be regularly checked for normal operation and the line is damaged. If it is not working, it must be replaced in time. If the line is damaged, it must be repaired or replaced in time.

产品老化1-副本.jpg

 

4.If the internal circuit of the LED display fails, non-professionals are forbidden to touch it, so as to avoid electric shock or damage to the wiring; if there is a problem, please have the professional perform maintenance.

5.When playing, do not stay in full yellow, full red, full green and other bright screens for a long time, so as not to cause excessive current, excessive heating of the power cord, damage to the LED lights, and affect the service life of the display. Do not disassemble randomly, splicing the screen body.

6.Keep the power supply stable and the grounding protection good. Try not to use it in harsh natural environments! (Such as strong thunder and lightning weather.

7.If water enters for various reasons, please cut off the power immediately and contact the maintenance personnel until the display board inside the screen is dry.

8.Water, iron powder and other conductive metal objects are strictly forbidden in the screen. The transparent LED display should be placed in a low dust environment as much as possible. Large dust will affect the display effect, and too much dust will cause damage to the circuit.

9.The surface is stained with dust, please clean it away from the vacuum cleaner and air gun facilities (do not wipe directly with a rag, etc., do not use force to prevent the screen from falling off.

产品老化2-副本.jpg