How to deal with the LED screen water?

Author: From: Time: 2019-08-21

Do you know how to deal with the water in the LED display?

Ⅰ. Use the fan or other tools to completely dry the flooded LED display at the fastest speed.

Ⅱ. Power aging of the display screen after completely drying, the specific steps are as follows:
1. Adjust the brightness (all white) to 10%, power aging for 8-12 hours.
2. Adjust the brightness (all white) to 30%, energize and age for 12 hours.
3. Adjust the brightness (all white) to 60%, power aging for 12-24 hours.
4. Adjust the brightness (all white) to 80%, power aging for 12-24 hours.
5. Adjust the brightness (all white) to 100%, power aging for 8-12 hours.

Ⅲ. After completing the above steps, the display screen basically returns to normal; However, there are several points to be paid attention to in the process of treatment: when water is found in the warehouse or water is found in the LED large screen, it should be treated urgently without delay; Timely find and organize personnel to blow-dry the water-filled LED display screen; Do not put the water-filled LED display screen into the air box, which will easily damage the LED wick. When the water is in the warehouse, the air boxes may be filled with water. All air boxes should be exposed to the sun to prevent moisture from volatilizing into the LED display screen. Failure to timely deal with all water-flooded LED display screens may more or less affect the stability of the screen. In the process of emergency treatment, the screen may be continuously dead after electrification. All the water-filled LED display screens are in the air box. After 72 hours or more, the screens are basically of no repair value. Please be careful.