Attention of LED display

Author: From: Time: 2019-09-06

First, check circuit and switch, keep switch dry, avoid leakage and shock accident.


Two, can use air conditioning dehumidification and place desiccant and physical moisture absorption method, keep dry, prevent the display screen from moisture.

Third, during the rainy season, the LED screen should be used at least once a week and turned on at least once a month. The screen should be on for more than 2 hours.

Fourthly, proper ventilation can help the steam attached to the display screen evaporate quickly and reduce the relative humidity of indoor environment. However, avoid ventilation in some calm and humid weather, which can increase the humidity in the room.

Fifth, the outdoor display screen USES the environment to be complex, will inevitably appear the water leakage phenomenon. In addition to the above measures, usually need to regularly check whether the waterproof apron aging, deformation, incomplete; Whether the screw or lock is easy to loosen and the pressure is insufficient.

Six, indoor LED display is suitable for outdoor use. In case of rainy day, the power must be cut off immediately. If it continues to rain, you should open the back cover of the box and dry it with a fan. Then leave it in a ventilated, dry room for more than eight hours. Play low brightness, ensure lighting for more than 4 hours, give full play to the moisture of electronic components.